Data Sheet
NetWay1X is a single port midspan PoE/PoE+ compliant power injector which
provides power and passes data (e.g. video) for PoE/PoE+ compliant devices.
Devices may be located up to 100m from NetWay1X. A NetWayXTX repeater
module can be utilized to extend the distance an additional 100m for a total
range of up to 200m. A maximum range of 600m is possible using multiple
repeaters, based on device port requirement. NetWay1X is capable of support-
ing non-PoE compliant fixed IP cameras by utilizing NetWay1512 adapter.
Altronix TP2450 plug-in transformer is included.
NetWay1XP - Single Port PoE/PoE+ Injector
for Standard Network Infrastructure
Rev. DSNetWay1XP_03032016
Overview
Altronix Corp. - 140 58th Street, Brooklyn, NY 11220 • 718-567-8181 • 888-258-7669 • altronix.com
NetWay1XP
Input:
• 24VAC @ 1.5 amp or 24VDC @ 1.5 amp.
TP2450 plug-in transformer (included).
Data:
• One (1) PoE/PoE+ port provides power and passes
data over ethernet (CAT5) cable up to 100m.
• Data rate: 10/100 Base-T compliant.
Output Power:
• Port provides up to 30W max.
• IEEE 802.3at (30W) and
IEEE 802.3af (15W) compliant.
• Short circuit protection.
Functions:
• Port status LED.
• PoE manual shutdown
(For UL 60950-1 applications only).
• Auto detection and protection of legacy
non-PoE cameras/devices.
Environmental:
Operating Ambient Temperature:
• 48VDC, 30W: 0ºC to 45ºC (32ºF to 113ºF).
• 24VAC, 30W: 0ºC to 37ºC (32ºF to 98.6ºF).
Environmental (cont’d):
• Relative humidity: 85%, +/--- 5%
• Storage temperature: --- 20º to 70ºC (--- 4º to 158ºF).
• Operating altitude: --- 304.8 to 3048m
(--- 1000 to 10,000 ft.).
Mechanical:
• Lightweight molded compact insulated housing.
• Spring terminals (input and PoE shutdown).
• Dimensions (W x D x H approx.):
3.5” x 3.5” x 1” (88.89mm x 88.89mm x 25.4mm).
• Product weight (approx.): 1.54 lbs. (0.7 kg).
• Shipping weight (approx.): 1.8 lbs. (0.82 kg).
Accessories:
NetWay1512:
• 13W adapter for non-PoE compliant IP cameras.
NetWay3012:
• 25W adapter for non-PoE compliant IP cameras.
NetWayXTX:
• PoE+ repeater module extends range 100m.
Specifications
Typical Application:
Agency Approvals
European Conformity
UL/CUL Listed for Information
Technology Equipment (UL 60950-1).
CUL Listed - CSA Standard C22.2
No.205-M1983, Signal Equipment.
Structured
Cable from
Network
Switch
24VAC/
24VDC Input
12VAC to 24VAC or
5VDC to 24VDC Input
for PoE shutdown
Structured Cable from
IP Camera, IP Lock or IP device
Power In LED
PoE LED
24VAC/VDC
Input
Power
ShutdownIN OUT
NetWay1X
Single Port Injector (Midspan)
Input: 24VAC/VDC, 1.5A
Output: IEEE 802.3at (30W) and
IEEE 802.3af (15.4W)
compliant.
www.altronix.com
I.T.E. 43KC
Z109