Installation Instructions

ManualsBrandsAltronix ManualsPOWERPower Supply, 16 PTC Class 2 Outputs, 12/24VDC @ 18A, 220VAC 2U

R1224DC16CBV

Rack Mount Power Supply

Installation Guide

Rev. 052308

More than just power.

Installing Company: _______________ Service Rep. Name: __________________________________

Address: _____________________________________________ Phone #: __________________

Summary of content (4 pages)

PAGE 1
R1224DC16CBV Rack Mount Power Supply Installation Guide Rev. 052308 More than just power.TM Installing Company: ________________ Service Rep.
PAGE 2
Overview: Altronix R1224DC16CBV Rack Mount Power Supply provides 12VDC or 24VDC distributed via sixteen (16) PTC protected outputs. Rack Mount Configuration Reference Chart: Altronix Model Number R1224DC16CBV Output Voltage Total Output Current (Power) 12VDC 18A 24VDC 18A PTC Protected Output 220VAC Number AutoCurrent 50/60Hz of Resettable (max per Input Ouputs Outputs output) Current 16 P 2A 1.8A 3.
PAGE 3
11. All four (4) power LEDs on the faceplate will illuminate when AC power is present (Fig. 3a, pg. 4). Note: If the power LEDs are not illuminated the cause may be due to the following: a. AC mains fail. b. Illuminated master power disconnect circuit breaker is OFF or tripped. If one (1) or more power output PTCs are tripped due to a short circuit or overload condition follow the steps below to reset PTC: 1. Set illuminated master power disconnect circuit breaker to the (OFF) position (Fig.
PAGE 4
Rack Mechanical Drawing and Dimensions (H x W x D approximate): Unit: 3.26” x 19.125” x 8.5” (83mm x 486mm x 216mm). Unit with Rack Brackets Attached: 5.21” x 19.125” x 8.5” (132.3mm x 486mm x 216mm) Fig. 3 Fig. 3a Fig. 3b Fig. 3c 1a 1b 1c 1d IEC 320 Connector 115VAC 60H. 3.26" (83mm) Rear View 4a 4b 4c 4d 3a 3b 3c 3d 2a 2b 2c 2d 1a 1b 1c 1d Bottom View Fig. 3d Illuminated master power disconnect circuit breaker: OFF position - Switch not illuminated. Outputs not powered.