Installation Guide

ManualsBrandsAltronix ManualsAutomation & Security16-Door Access and Power Integration Kit

Access & Power Integration

T2ZK7F8

8 Door Kit with Fused Outputs

Fully assembled kit includes:

- Trove2 enclosure with TZ2 Altronix/ZKTeco backplane

- One (1) eFlow104NB - Power Supply/Charger

- One (1) ACM8 - Access Power Controller

- One (1) VR6 - Voltage Regulator

- One (1) PDS8 - Dual Input Fused Power Distribution Module

T2ZK7F16

16 Door Kit with Fused Outputs

Fully assembled kit includes:

- Trove2 enclosure with TZ2 Altronix/ZKTeco backplane

- One (1) eFlow104NB - Power Supply/Charger

- Two (2) ACM8 - Access Power Controllers

- One (1) VR6 - Voltage Regulator

- One (1) PDS8 - Dual Input Fused Power Distribution Module

Rev. TZK_041019

Installing Company: _____________________ Service Rep. Name: __________________________________________

Address: ________________________________________________________ Phone #: _________________________

All registered trademarks are property of their respective owners. More than just power.™

Installation Guide

All components of these Trove kits are UL Listed sub-assemblies.

Please refer to the included corresponding Sub-Assembly Installation Guides for further information.

Summary of content (8 pages)

PAGE 1
Access & Power Integration T2ZK7F8 8 Door Kit with Fused Outputs Fully assembled kit includes: - Trove2 enclosure with TZ2 Altronix/ZKTeco backplane One (1) eFlow104NB - Power Supply/Charger One (1) ACM8 - Access Power Controller One (1) VR6 - Voltage Regulator One (1) PDS8 - Dual Input Fused Power Distribution Module T2ZK7F16 16 Door Kit with Fused Outputs Fully assembled kit includes: - Trove2 enclosure with TZ2 Altronix/ZKTeco backplane One (1) eFlow104NB - Power Supply/Charger Two (2) ACM8 - Access
PAGE 2
Overview: Altronix T2ZK7F8 and T2ZK7F16 Trove ZKTeco kits are pre-assembled and consist of Trove enclosures/backplanes with factory installed Altronix power supply/chargers and sub-assemblies. T2ZK7F8 accommodates up to two (2) ZKTeco modules for up to eight (8) doors in a single enclosure. T2ZK7F16 accommodates up to four (4) ZKTeco modules for up to sixteen (16) doors in a single enclosure. 4.5 6.3A/ 15A/ 250V 32V 20.28-26.4 8 16 8 10A/ 2.5A/ 10A/ 250V 250V 32V PDS8 Board Output Fuse Rating 20.
PAGE 3
T2ZK7F8: Configuration of ZKTeco inBio Modules: 1. Fasten DIN Rail (provided by ZKTeco) to pem spacers, utilizing 5/16” pan head screws (included) (Fig. 2, pg. 3). 2. Mount ZKTeco modules to DIN Rail (refer to below chart for model number, Fig. 2, pg. 3). 3. Fasten TZ2 backplane to Trove2 enclosure utilizing lock nuts (provided by Altronix). ZKTeco Model Pem Mounting inBio-160, inBio-160 Pro, inBio-260, inBio-260 Pro, inBio-460, inBio-460 Pro A Fig.
PAGE 4
1. 2. 3. T2ZK7F8: Configuration of ZKTeco C3 Modules: Fasten spacers (provided) to pems that match the hole pattern for ZKTeco boards. Refer to below chart for model number and Fig. 3, pg. 4. Mount ZKTeco boards to spacers utilizing 5/16” pan head screws (included) (Fig. 3a, pg. 4). Fasten TZ2 backplane to Trove2 enclosure utilizing lock nuts (included). ZKTeco Model Pem Mounting C3-400, C3-400 Pro B C3-100, C3-100 Pro, C3-200, C3-200 Pro C – DC + Fig.
PAGE 5
1. 2. 3. T2ZK7F16: Configuration of ZKTeco inBio Modules: Fasten DIN Rail (provided by ZKTeco) to pem spacers, utilizing 5/16” pan head screws (included) (Fig. 4, pg. 5). Mount ZKTeco modules to DIN Rail (refer to below chart for model number, Fig. 4, pg. 5). Fasten TZ2 backplane to Trove2 enclosure utilizing lock nuts (provided by Altronix). ZKTeco Model Pem Mounting inBio-160, inBio-160 Pro, inBio-260, inBio-260 Pro, inBio-460, inBio-460 Pro A Fig.
PAGE 6
T2ZK7F16: Configuration of ZKTeco C3 Modules: 1. Fasten spacers (provided) to pems that match the hole pattern for ZKTeco boards. (refer to below chart for model number, Fig. 5, pg. 6). 2. Mount ZKTeco boards to spacers utilizing 5/16” pan head screws (included) (Fig. 5a, pg. 6). 3. Fasten TZ2 backplane to Trove2 enclosure utilizing lock nuts (included). ZKTeco Model Pem Mounting C3-400, C3-400 Pro B C3-100, C3-100 Pro, C3-200, C3-200 Pro C – DC + Fig.
PAGE 7
eFlow Power Supply/Chargers can be Controlled and Monitored while Reporting Power/Diagnostics from Anywhere over the Network... LINQ2 - Network Communication Module LINQ2 provides remote IP access to real-time data from eFlow power supply/chargers to help keep systems up and running at optimal levels.
PAGE 8
Enclosure Dimensions (H x W x D): 27.25” x 21.75” x 6.5” (692.2mm x 552.5mm x 165.1mm) 21.50” (546.1mm) 5.25” (133.35mm) 3.5”(88.9mm) 3.5”(88.9mm) 5.25” (133.35mm) 0.685” (17.4mm) 1.25” (31.8mm) 6.25” (158.8mm) 1.25” (31.8mm) 0.5625” (14.3mm) 1.77” (45mm) 2.415” (61.3mm) 1.5” (38.1mm) Knockouts 1.125” (28.3mm) 0.885” (22.5mm) 2.00” (50.8mm) 6.25” (158.8mm) 2.00” (50.8mm) 19.80” (502.9mm) 8.00” (203.2mm) 27” (685.8mm) 8.25” (209.5mm) 6.75” (171.5mm) 2.00” (50.8mm) 0.85” (21.6mm) 2.00” (50.