SIGNALING Access & Power Integration Trove1M1 - Trove1 enclosure with Altronix/Lenel backplane (TM1) TM1 - Altronix/Lenel backplane only Trove2M2 - Trove2 enclosure with Altronix/Lenel backplane (TM2) TM2 - Altronix/Lenel backplane only TMV2 - Altronix/Lenel Door Backplane.
Overview: Altronix Trove1M1, Trove2M2 and Trove3M3 accommodate various combinations of Lenel boards with or without Altronix power supplies and sub-assemblies for access systems. Specifications: Trove1M1 Trove1 enclosure with TM1 Altronix/Lenel backplane. • 16 Gauge grey enclosure with ample knockouts for convenient access. • Includes: tamper switch, cam lock, lock nuts and mounting hardware. Enclosure Dimensions (H x W x D): 18” x 14.5” x 4.625” (457mm x 368mm x 118mm). TM1 Altronix/Lenel backplane.
Installation Instructions for Trove1, Trove2, Trove3: Wiring methods shall be in accordance with the National Electrical Code/NFPA 70/ANSI, and with all local codes and authorities having jurisdiction. Product is intended for indoor use only. 1. Remove backplane from enclosure. Do not discard hardware. Fig. 1 2. Mark and predrill holes in the wall to line up with the top three keyholes in the enclosure. Install two/three upper fasteners and screws in the wall with the screw heads protruding.
Installation Instructions for Sub-Assemblies to TM1: Altronix Power Supplies/Chargers and/or Sub-Assemblies: 1. Fasten standoffs (provided) to pems that match the hole pattern for Altronix Power Supply/Chargers or Altronix Sub-Assembly boards (positions (B) and (C), Fig. 2, pg. 4). Use snap on nylon standoffs for the upper two mounting holes in the board. Use metal standoffs for the bottom mounting holes to provide sufficient grounding for the board. 2. Affix boards to standoffs (Fig. 2, pg.
TM2 Sub-Assembly Position Chart for the Following Models: Altronix Power Supplies/Chargers Altronix AL400ULXB2 AL600ULXB AL1012ULXB AL1024ULXB2 eFlow4NB* eFlow6NB* eFlow102NB* eFlow104NB* Pem Mounting A Pem Mounting Input Rating Output Rating Refer to 115VAC, 60Hz, 3.5A 115VAC, 60Hz, 3.5A 115VAC, 60Hz, 2.6A 115VAC, 60Hz, 4.2A 120VAC, 60Hz, 3.5A 120VAC, 60Hz, 3.5A 120VAC, 60Hz, 3.5A 120VAC, 60Hz, 4.
Installation Instructions for Altronix Power Supplies and/or Sub-Assemblies to TM2: 1. Fasten standoffs (provided) to pems that match the hole pattern for Altronix Power Supply/Chargers or Altronix Sub-Assembly boards (Fig. 3, pg. 6). Use snap on nylon standoffs for the upper two mounting holes in the board. Use metal standoffs for the bottom mounting holes to provide sufficient grounding for the board. 2. Affix boards to standoffs (Fig. 3, pg.
Installation Instructions for Lenel Access Controllers to TM2: 1. Fasten snap on standoffs onto metal pems configuration (A) (B) of backplane depending on the access controller (Fig. 4, pg. 7). 2. Position access controller module over corresponding standoffs and depress onto snap on standoffs (Fig. 4a, pg. 7). 3. Mount backplane to enclosure with hardware.
Installation Instructions for Lenel Access Controllers to TM2: 1. Fasten snap on standoffs onto metal pems configuration (A) (B) of backplane depending on the access controller (Fig. 5, pg. 8). 2. Position access controller module over corresponding standoffs and depress onto snap on standoffs (Fig. 5a, pg. 8). 3. Mount backplane to enclosure with hardware. Access Controller Position Chart for the Following Models: Lenel LNL-2210 LNL-1300e LNL-1300 Pem Mounting A B Current Draw 12VDC 900mA max.
Installation Instructions for Lenel Access Controllers to TMV2 (Door Backplane): 1. Fasten snap on standoffs onto metal pems configuration (A) (B) of backplane depending on the access controller (Fig. 6, pg. 9). 2. Position access controller module over corresponding standoffs and depress onto snap on standoffs (Fig. 6a, pg. 9). 3. Mount backplane to enclosure with hardware.
TM3 Sub-Assembly Position Chart for the Following Models: Altronix Power Supplies/Chargers Altronix AL400ULXB2 AL600ULXB AL1012ULXB AL1024ULXB2 eFlow4NB* eFlow6NB* eFlow102NB* eFlow104NB* Pem Mounting A Pem Mounting Input Rating Output Rating Refer to 115VAC, 60Hz, 3.5A 115VAC, 60Hz, 3.5A 115VAC, 60Hz, 2.6A 115VAC, 60Hz, 4.2A 120VAC, 60Hz, 3.5A 120VAC, 60Hz, 3.5A 120VAC, 60Hz, 3.5A 120VAC, 60Hz, 4.
Installation Instructions for Altronix Power Supplies and/or Sub-Assemblies to TM3: 1. Fasten standoffs (provided) to pems that match the hole pattern for Altronix Power Supply/Chargers or Altronix Sub-Assembly boards (Fig. 7, pg. 11). Use snap on nylon standoffs for the upper two mounting holes in the board. Use metal standoffs for the bottom mounting holes to provide sufficient grounding for the board. 2. Affix boards to standoffs (Fig. 7, pg.
Installation Instructions for Lenel Access Controllers to TM3: 1. Fasten snap on standoffs onto metal pems configuration (A) (B) of backplane depending on the access controller (Fig. 8, pg. 12). 2. Position access controller module over corresponding standoffs and depress onto snap on standoffs (Fig. 8a, pg. 12). 3. Mount backplane to enclosure with hardware.
Notes: Trove / Lenel - 13 -
Trove1 Enclosure Dimensions (H x W x D approximate): 18” x 14.5” x 4.625” (457mm x 368mm x 118mm) 14.5” (368mm) 7.25” (184.15mm) 1.45” (36.83mm) 1.25” (31.75mm) 4.5” (114.3mm) 1.948” (49.483mm) 13.0” (330.2mm) 1.5” (38.09mm) 1.25” (31.75mm) 1.5” (38.09mm) 0.5897” (14.98mm) 0.569” (14.52mm) 8.5” (215.9mm) 8.5” (215.9mm) 18.0” (457.2mm) 6.5” (165.1mm) 6.5” (165.1mm) 0.6012” (15.27mm) 1.0958” (27.83mm) 4.5” (114.3mm) 4.5” (114.3mm) 2.75” (69.85mm) 1.115” (28.32mm) 1.362” (34.
Trove2 Enclosure Dimensions (H x W x D approximate): 27.25” x 21.75” x 6.5” (692.2mm x 552.5mm x 165.1mm) 21.50” (546.1mm) 2.00” (50.8mm) 5.25” (133.35mm) 3.50” (88.9mm) 3.50” (88.9mm) 5.25” (133.35mm) 0.685” (17.399mm) 1.25” (31.75mm) 0.5625” (14.29mm) 1.77” (44.96mm) 2.415” (61.34mm) Knockouts 1.125” (28.32mm) 0.885” (22.479mm) 6.25” (158.75mm) 0.85” (21.59mm) 6.25” (158.75mm) 1.25” (31.75mm) 19.80” (502.92mm) 1.5” (38.1mm) 2.00” (50.8mm) 6.75” (171.45mm) G 8.25” (209.54mm) 27.00” (685.
Trove3 Enclosure Dimensions (H x W x D approximate): 36.12” x 30.125” x 7.06” (917.5mm x 768.1mm x 179.3mm) 2.00” (50.8mm) 7.12” (222.25mm) 9.5” (241.3mm) 1.25” (31.75mm) 1.55” (39.37mm) 30.12” (768.1mm) 14.01” (355.9mm) 2.00” (50.8mm) 14.01” (355.9mm) 1.10” (27.9mm) 2.00” (50.8mm) 10.75” (273.1mm) 1.78” (45.21mm) 1.07” (27.2mm) 1.25” (31.8mm) 9.5” (241.3mm) 10.75” (273.1mm) G G 10.62” (269.8mm) 10.62” (269.8mm) 33.63” (854.20mm) 10.75” (273.1mm) 36.12” (917.5mm) 10.75” (273.1mm) 7.