User manual

KN2108 / KN2116 User Manual
98
(Continued from previous page.)
Enable Refresh The KN2108 / KN2116 can redraw the screen every 1 to 99 seconds,
eliminating unwanted artifacts from the screen. Select Enable
Refresh and enter a number from 1 through 99. The KN2108 /
KN2116 will redraw the screen at the interval you specify. This
feature is disabled by default. Click to put a check mark in the box
next to Enable Refresh to enable this feature.
Note: 1. The switch starts counting the time interval when mouse
movement stops.
2. Enabling this feature increases the volume of video data
transmitted over the network. The lower the number
specified, the more often the video data is transmitted.
Setting too low a value may adversely affect overall
operating responsiveness.
Transparency Adjusts the transparency of the Control Panel and other Toolbars.
Slide the bar until the display in the example window is to your liking.
Color Depth
Control
This setting determines the richness of the video display by adjusting
the amount of color information.