User manual

KN2108 / KN2116 User Manual
152
OSD Factory Default Settings
The factory default settings are as follows:
Supported KVM Switches
We recommend using Altusen KH1508 or KH1516 switches when cascading
from the KN2108 / KN2116. The following is a list of supported ATEN KVM
switches that can also be used.
 CS-88A
 CS-138A
 CS-9134
 CS-9138
 KH1508
 KH1516
Note: The installation cannot be cascaded beyond the second level.
Setting Default
OSD Hotkey [Scroll Lock] [Scroll Lock]
Port ID Display Port Number + Name
Port ID Display Duration 3 Seconds
Scan/Skip Mode All
Scan Duration 5 Seconds
Screen Blanker 0 Minutes (disabled)
Beeper On
Accessible Ports F (Full) For all Users on all Ports