User manual

KN2108 / KN2116 User Manual

System Requirements

Remote User Computers

Remote user computers (also referred to as client computers) are the ones the

users log into the switch with from remote locations over the internet (see

Terminology, page xiii). The following equipment must be installed on these

computers:

 For best results we recommend that the computers used to access the

switch have at least a P III 1 GHz processor, with their screen resolution

set to 1024 x 768.

 Browsers must support 128 bit SSL encryption.

 For best results, a network transfer speed of at least 128kbps is

recommended.

 For the WinClient AP Control Panel, DirectX 8 must be present, and at

least 90MB of memory must be available after installation.

 For the Java Client AP Control Panel, the latest version of Sun's Java

Runtime Environment (JRE) must be installed, and at least 145MB of

memory must be available after installation.

 For the browser-based WinClient ActiveX Viewer, DirectX 8 must be

present, and at least 150MB of memory must be available after

installation.

 For the browser-based Java Applet Viewer the latest version of Sun's Java

Runtime Environment (JRE) must be installed, and at least 205MB of

memory must be available after installation.

 For the Log Server, you must have the Microsoft Jet OLEDB 4.0 or higher

driver installed.

Servers

Servers are the computers connected to the switch via KVM Adapter Cables

(see Terminology, page xv). The following equipment must be installed on

these servers:

 A VGA, SVGA or multisync port

 For USB KVM Adapter Cable Connections: a Type A USB port and USB

host controller

 For PS/2 KVM Adapter Cable Connections: 6-pin Mini-DIN keyboard

and mouse ports