User manual

Chapter 1. Introduction
5
Video
Only the following non-interlaced video signals are supported:
KVM Adapter Cables (CPU Modules)
 Cat 5 (or higher) cable is required to connect the KN2108 / KN2116 to one
of the KVM Adapter Cables (see Single Stage Installation Diagram,
page 20).
 The following KVM Adapter Cables are required for use with the KN2108
/ KN2116:
Resolution Refresh Rates
640 x 480 60, 70, 75, 85
720 x 400 70, 75
800 x 600 56, 60, 70, 75, 85
1024 x 768 60, 70, 75, 85
1152 x 864 60, 70, 75
1280 x 1024 60, 70, 75
Function Module
Connect to devices with PS/2 ports KA9120
Connect to devices with USB ports KA9170
Connect to Sun Legacy computers KA9130
Connect to Sun USB computers KA9131
Connect to serial based devices KA9140