User manual

KN2108 / KN2116 User Manual
12
Stacking and Rack Mounting
The KN2108 / KN2116 can be stacked on the desktop or rack mounted in a
variety of ways. The following sections take you through the procedures for
each method.
Stacking
The KN2108 / KN2116 can be placed on any appropriate level surface that can
safely support its weight plus the weight of its attached cables. To place the
KN2108 / KN2116, or to stack units if you are daisy chaining them, remove the
backing material from the bottom of the rubber feet that came with this
package, and stick them onto the switch’s bottom panel at the corners, as
shown in the diagram, below:
Note: To ensure adequate ventilation, allow at least 5.1 cm on each side, and
12.7cm at the back for power cord and cable clearance.