User manual

Chapter 2. Hardware Setup
13
Rack Mounting - Split
The KN2108 / KN2116 can be installed in most standard 19" (1U) racks. There
are three configurations: split; front; and rear. Of the three, we recommend the
split method.
1. Remove the four screws at the front and rear of the unit:
2. Separate the front and rear modules, then use the M3 x 8 Phillips head hex
screws supplied with the rack mount kit to screw the rack mounting
brackets into both modules:
Phillips head hex
M3 x 6
Phillips head hex
M3 x 8