User manual

KN2108 / KN2116 User Manual
24
Hot Plugging
The KN2108 / KN2116 supports hot plugging - components can be removed
and added back into the installation by unplugging and replugging their cables
from the ports without the need to shut the unit down.
If you change computer positions, however, in order for the OSD menus to
correspond to the KVM port changes, you must manually reedit the Port
Names to have the OSD reflect the new Port information. See Port Names,
page 42 for details.
Note: If the computers Operating System does not support hot plugging, this
function may not work properly.
Powering Off and Restarting
If it becomes necessary to power off the KN2108 / KN2116, or if the switch
loses power and needs to be restarted, wait 10 seconds before powering it back
on. The computers should not be affected by this, but if any of them should fail,
simply restart them.