User manual

KN2108 / KN2116 User Manual

Browser Login

To log into the KN2108 / KN2116 from an Internet browser:

1. Open the browser and specify the IP address in the URL bar.

Note: For security purposes, a login string may have been set by the

Administrator (See Security, page 59, for details). If so, you must

include a forward slash and the login string along with the IP address

when you log in. For example:

192.168.0.60/kn2116

Ask your Administrator for the IP address and login string.

2. When the Security Alert dialog box appears, accept the certificate – it can

be trusted. (See Trusted Certificates, page 145, for details.)

3. A login page appears:

4. Provide a valid Username and Password (set up by the KN2108 / KN2116

administrator), then Click Login to continue.

Note: 1. If you supply an invalid login, the authentication routine will

return a message stating, Invalid Username or Password. Please

try again. If you exceed the number of login failures set by the

Administrator, a timeout period is invoked. You must wait until

the timeout period expires before you can attempt to log in again

(See Login Failures, page 61, for details).

2. If you are the Administrator and are logging in for the first time,

use the default Username: administrator; and the default

Password: password. For security purposes, we strongly

recommend you remove these and give yourself a unique

Username and Password (see User Management, page 48).

After you have successfully logged in, the KN2108 / KN2116 Main Web page

appears with the General dialog box displayed. See Chapter 5, Browser

Operation for full details.