User manual

Chapter 3. Logging In
33
Connecting
To connect to a KN2108 / KN2116 unit:
1. From the Server List box, double-click the device that you wish to
connect to. Or, specify the IP address and port number in the Server IP and
Port input boxes, and then Click Connect. The Login dialog box appears:
2. Key in a valid Username and Password, and then click OK.
The program attempts to connect to the selected KN2108 / KN2116 unit.
While it does so, you can check the Message List window for status
messages regarding the operation's progress.
3. Once contact with the KN2108 / KN2116 has been established, the Switch
to Remote View button becomes active. Click it to connect to the
KN2108 / KN2116 and take over console control of the unit that is
connected to it.