User manual

KN2108 / KN2116 User Manual
38
After you successfully log in, the Local Console OSD comes up:
The OSD consists of four pages, each with a specific set of functions: Main;
Configuration; Administration; and Log. Each of these pages is discussed in
the sections that follow
There are four buttons at the right of the title bar. The purpose of each is
described (going from left to right), in the table below. Note that the same
effect can be achieved by pressing a function key. The corresponding function
key is shown in parenthesis below the button name.
Button Purpose
Screen View
([F6])
Toggles the OSD display between Full Screen and Window view.
Note: Although the OSD appears the same in both views, in Full Screen view the
background is completely black when the OSD is brought up, whereas in Window
view the background screen remains visible.
Transparency
([F7])
Clicking this button makes the OSD display semi transparent, allowing
whatever the OSD screen is covering to show through. Clicking the
button again, returns the OSD screen to normal opacity.
Note: 1. The Screen View and Transparent buttons are on the Local Console
OSD only. The Web browser OSD and AP versions do not have these
functions.
2. We recommend setting your monitor refresh rate to a value greater
than 75Hz before using this feature.
3. If you switch to a null port when Transparency is enabled, the feature
becomes disabled.
Log Out
([F8])
Closes the OSD display and logs you out of the KN2108 / KN2116
session.
Hide
([Esc])
Closes the OSD display but does not log you out of the session. You
can bring the display back with the OSD hotkeys (see OSD Hotkey,
page 109).