User manual

Chapter 4. Administration
51
Service Configuration
The Service Configuration dialog is composed of two main panels: Access Port
and Log Server:
Access Port
As a security measure, if a firewall is being used, the Administrator can specify
the port numbers that the firewall will allow, and set the firewall accordingly.
Users must specify the port number when they log in to the KN2108 / KN2116.
If an invalid port number (or no port number) is specified, the KN2108 /
KN2116 will not be found.
An explanation of the fields is given in the table below:
Note: 1. If there is no firewall (on an Intranet, for example), it doesn’t matter
what these numbers are set to, since they have no effect.
2. The access ports cannot have the same value. You must set a different
value for each one.
Field Explanation
Program This is the port number that must be specified when
connecting from the Windows Client software program. Valid
entries are from 1024-60,000. The default is 9000.
Java This is the port number used for Java Client connections.
Valid entries are from 0-65535. The default is 9002