User manual

Chapter 4. Administration
59
Security
The Security page controls access to the KN2108 / KN2116.
IP and MAC Filtering
 If any filters have been configured, they appear in the IP Filter and/or
MAC Filter list boxes.
 IP and MAC Filters control access to the KN2108 / KN2116 based on the
IP and/or MAC addresses of the computers attempting to connect. A
maximum of 100 IP filters and 100 MAC filters are allowed. To enable IP
and/or MAC filtering, Click to put a check mark in the IP Filter Enable
and/or MAC Filter Enable checkbox.
 If the include button is checked, all the addresses within the filter range
are allowed access; all other addresses are denied access.
 If the exclude button is checked, all the addresses within the filter
range are denied access; all other addresses are allowed access.
 To add a filter, click New. A dialog box similar to the ones below appears: