User manual

KN2108 / KN2116 User Manual
80
OSD Hotkey Summary Table
The following table presents a summary of the OSD Hotkey actions.
To set the OSD Hotkey, see OSD Hotkey, page 109.
The Toolbar Icons
Note: The administrator selects which ports are accessible to each user with
the User Management function (see page 48 for details).
To... When... Do This...
Open the OSD
Toolbar
The OSD Toolbar is not open. Click the OSD Hotkey twice.
Open the OSD The OSD Toolbar is open. Click the OSD Hotkey once.
Open the OSD The OSD Toolbar is not open. Click the OSD Hotkey three times.
Click to skip to the first accessible port on the entire installation without
having to invoke the OSD.
Click to skip to the first accessible port previous to the current one without
having to invoke the OSD.
Click to begin Auto Scan Mode. The KN2108 / KN2116 automatically
switches among the ports that were selected for Auto Scanning under the
Configuration Scan Select function (see Scan Select, page 109). This
allows you to monitor their activity without having to switch among them
manually.
Click to skip from the current port to the next accessible one without having
to invoke the OSD.
Click to skip from the current port to the last accessible port on the entire
installation without having to invoke the OSD.
Click to bring up the OSD.
Click to close the toolbar.
Click to logout and exit the WinClient ActiveX Viewer application.
Local OSD only: Click to switch toolbar to Transparent/Opaque Mode.
Remote OSD only: Click to invoke Panel Array Mode (see page 83).