User manual

Chapter 6. The User Interface

Panel Array Mode

Clicking on the OSD Toolbar's Panel icon invokes Panel Array Mode. Under

this mode, the OSD divides your screen into a 4 x 4 grid of 16 panels:

 Each panel represents one of the KN2108 / KN2116's ports. Starting with

Port 1 at the upper left; going from left to right; top to bottom; Port 16 is at

the lower right.

 When the Array is first invoked, it scans through each of the ports that

were selected for Auto Scanning under the Configuration page's Scan

Select function (see page 109), and displays information about the port

(port name, resolution, on line status, port access status), at the bottom of

the panel.

 The number of panels in the array (16, 9, 4, or 1) can be selected by

clicking Show More Ports (+), and Show Fewer Ports (-) on the panel

array toolbar.

 If the computer connected to a port is on line, its screen displays in its

panel, otherwise the panel is blank.

 Only ports that are accessible to the currently logged in user display (see

Port Access, page 50). All other panels are blank.

 If you move the mouse pointer over a panel, information about the port

displays at the bottom of the screen.

(Continues on next page.)