Instruction Manual

Page 5 of 5 EPH-N00-06088
6-3-02
7
Adjust the drip vinyl [*H] by sliding it left or
right until it just touches the curb. Trim the vinyl
flush with the hinge side and notch 1/2" longer
than the drip rail [*G] as shown on the strike side.
Slide the vinyl into the drip rail and secure it on
the hinge side of the drip rail with one #6 x 3/8"
truss head screw [*K].
The drip plug [*L] is supplied with a left and right
hand plug together. Break the two pieces apart
and insert the appropriate plug into the high
(strike) side of the drip rail. Discard the unused
drip plug. Peel off the tape backing [*J] and
carefully press the drip rail to the door in the
marked position.