Instruction Manual

EPH-N00-06015
11-24-04
Page 8 of 8
13
Caulk both ends of the tub track [A] where
it meets the wall jambs [B] and the interior edge
of the wall jambs as shown. Run a bead of caulking
along the interior edge of the tub track.
NOTE: We recommend that you let the caulk cure
for 24 hours before using your new enclosure.
The Care and Cleaning of your new ALUMAX Bath Enclosure. The simplest
and preferred method of cleaning your unit is by washing it with clean water and
drying with a soft cloth. If soil is still present after drying, a non-abrasive cleanser
with a pH of seven to eight may be used. Comet Bathroom Cleaner
®
has been
tested and is recommended by the Bath Enclosure Manufacturers Association
(BEMA). Do not use scouring pads, sharp instruments, or acid-based cleansers to
clean the unit.
Thank you for choosing an A
LUMAX Bath Enclosure. Please take a moment
to complete and return the enclosed Customer Response Card. The information
you provide helps us improve the quality of our products and provide better service
to you, our customer.