Upgrade Kit for Lensman-X 3-Axis Gimbal Owner manual

STEP 10: Gimbal Tuning Software

Specification for the Simple Brushless Gimbal Controller with [Brushless Upgrade Kit for Lensman-X 3-Axis Gimbal]:

Board: version 1.0

Firmware: 2.2 b2 (Cannot upgrade via the GUI software or will damage the board!)

Tuning Software: SimpleBGC GUI v2.2b2 (Other version will not work for this board!)

Input Voltage: 11.1V 3S Lipo with JST Connector (for the Default Setting)

Controllable Axis: Pitch Axis 0-90 Degree

IMU Mounting Orientation: At the bottom side of Camera Mounting Plate

Default PID and Power Setting used for: DSLR Camera with Lens 0.8-1.4kg

(Remarks: For other camera out of this range will need to have different PID setting.)