Upgrade Kit for Lensman-X 3-Axis Gimbal Owner manual

How to connect to the computer?

Step 1.

Download the v2.2b2 software “ SimpleBGC_GUI_2_2b2 ” at the official website

http://www.basecamelectronics.com/files/v10/SimpleBGC_GUI_2_2b2.zip

(Important: only the GUI software with v2.2b2 can be used for this Controller)

Step 2.

Connect the Gimbal Control Board to the PC computer(Window) only. No battery is needed at the moment. Wait for around 1-2 mins for the

driver to be installed automatically. When the driver has been installed successfully, you will get a notice from your computer.

If your computer fail to install the Driver automatically, download the driver here and install it manually:

http://www.silabs.com/products/mcu/pages/usbtouartbridgevcpdrivers.aspx

Step 3.

Run the GUI Software (v2.2b2): SimpleBGC_GUI_2_2b2 → SimpleBGC_GUI(.exe)

1. Run the GUI Software 2. Open the correct COM 3. Click the “Connect” button.