User Manual

STEP 8: Converting to Aerial Mode

Before Converting to Aerial Mode, main sure your Gimbal is entered in the Mode 4. When the Gimbal is powered on, Press 4 times of the

Joystick as to enter to Mode 4. Now you can turn off the Gimbal and convert it to an Aerial Mode easily.

Push the Joystick Release the Upper Handle. Release the 4 Mounting Screws. Take off the Handle Unit.

Prepare the X-Mounting Unit Insert the Main Cable through the hole of X-

mounting.

Secure the X-Mounting with 4 Screws. (Apply

Little Thread-Locker to the Screws.)