Owner`s manual

12
Cooking with Dual Radiant Element
Dual Element can be operated using inner element only or
both elements. Double lines between settings on dual
element control knob indicate both inner and outer
elements are being used. Single lines indicate inner
element only is being used.
To use inner element
1. Push in and turn knob to the single line settings.
2. Push in and turn surface element control to desired
setting.
• Element will cycle on and off to maintain desired
heat setting.
OFF
LO
HI
HI
LO
dual
inner
Dual Surface Element Control Knob
3. When finished cooking turn control to OFF position.
To use both inner and outer element
1. Push in and turn control knob to double line setting.
2. Follow steps 2-3 above.
Halogen Element (ARHC8700)
Halogen element is able to provide constant without
cycling power. LO setting allows excellent simmer
capabilities.
1. Push in and turn control knob to the desired setting.
• LO through 3 should be used for food that is
prepared at less than boiling temperatures or to
simmer. When using settings LO through 3 the
element will not be illuminated.
• 4 through 5 can be used to maintain boiling in
moderate amounts of liquid.
• 6 through 7 should be used to maintain boiling or
larger amounts of food, low temperature frying and
to maintain correct pressure in a pressure cooker.
• 7 through 9 can be used to fry meat and poultry or
to maintain deep-fat frying temperatures.
• HI should be used to bring food to boiling
temperatures. When food is boiling temperature
should be reduced to 4,5,6,7.
OFF
LO
HI
5
6
7
8
9
4
3
2
Halogen Surface Element Control Knob
2. When finished cooking, turn control to OFF position.