Accessories Catalog
6 www.amana-ptac.com CT-DPTAC
accessories
All our wall sleeves have industry standard dimensions of 42” wide
x 16¹/16” high. All Stonewood Beige G-90 metal wall sleeves are
thermally insulated and include a weather board for use during
construcon. The WS900D, SC and INTERNAL 14⅛” depth is the
industry standard. Sleeves may be shipped separately to allow for
installaon during construcon.
We oer over 150 dierent custom colors to choose from for your wall
sleeves. In addion, we can custom paint the exterior a dierent color
from the interior to meet your needs.
WS900E Standard PTAC sleeve
WS900SC Seacoast triple protected
WS900D-
INTERNAL
Internal drain only for
window-wall installaons
(DK900D sold separately)
We oer sleeves in several depths for thicker
wall installaons or special room conguraons
WS9xxD1 16” to 24” in 1”
increments
WS928D1 Extra deep 28”
WS930D1 Extra deep 30”
WS936D1 Extra deep 36”
14⅛"
42"
16
1
/
16
"
Available in stamped-aluminum or architecturally louvered for
applicaon with an Amana brand WS900D wall sleeve.
AGK—Extruded aluminum architectural grille available with anod-
ized aluminum nish and a baked-on paint nish for durabil-
ity. Choose from 3 stock colors or a custom color to blend
with your building’s exterior color scheme.
CB (Clear Anodized),
DB (Dark Brown/Bronze),
TB (Stonewood Beige), WB (White), SB (Special/Custom Colors)
PGK—One-piece injecon molded grille using a polymer blend of
engineered thermoplasc high-impact strength material with
chemical resistance and an exterior UV protecve coang.
Choose from 3 stock colors:
DB (Dark Brown/Bronze), TB (Stonewood Beige), WB (White)
SGK01B Single Pack
SGK01TB Stonewood Beige
AGK01CB
Anodized Aluminum
(Silver)
AGK01DB Dark Bronze/Brown
AGK01TB Stonewood Beige
AGK01WB Amana White
AGK01SB Custom Colors
PGK01DB Dark Bronze/Brown
PGK01TB Stonewood Beige
PGK01TB Amana White
AGK
or
PGK
SGK
Aaches to the wall sleeve base pan for controlled internal or external
disposal of condensate.
DK900D
Condensate Drain Kit
(use with WS900E)
DK9001D
Condensate Drain Kit
(use with WS900B)
DK900D
For quick connecons of the remote, or wired, thermostats, wired
EMS, or front desk with jumpers and connectors.
PWHK01C Wire Harness Kit
Oponal kit for use with units controlled via a wired, remote
thermostat. Covers control touch-pad for wired thermostat
installaons.
REK10B Remote Escutcheon Kit
(10-pack)
Each kit contains 80 wires and wire nuts, enough to aach a
thermostat and one addional accessory to 10 PTAC units.
Wires come in assorted colors for easy aachment.
The fully skirted sub-base conceals wiring while providing strong
support, if needed. Plug-in receptacle and eld-wiring access speeds
installaon. Electrical accessories, such as fuse holders, circuit
breakers and disconnect switches, meet N.E.C. requirements.
PTSB320E 230/208V 15/20A
PTSB330E 230/208V 30A
PTSB420E 265V 15/20A
PTSB430E 265V 25A
PTSB000E Non-electrical
Skirting
Skirting
Leveling Legs
Optional
Fuse Holder
Location
Optional
Power Switch and Circuit Breaker
Location
Power Receptacle
Subbase Box Assembly
Gives wall sleeve front support and helps to level the unit for
installaon.
LL2B Leveling legs for
WS9** sleeves