Measurement Guide

TOOLS AND MATERIALS REQUIRED:

SAFETY PRECAUTIONS:

1. TURN OFF ELECTRICAL POWER BEFORE STARTING INSTALLATION OF LIGHT FIXTURE.

2. THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE APPLICABLE INSTALLATION CODE BY A PERSON

FAMILIAR WITH THE CONSTRUCTION AND OPERATION OF THE PRODUCT AND THE HAZARDS INVOLVED.

3. CAUTION-RISK OF ELECTRIC SHOCK. CONSULT A QUALIFIED ELECTRICIAN TO ENSURE CORRECT BRANCH CIRCUIT

CONDUCTOR.

PACKAGE CONTENTS

PART QTY

A 1

B 2

and returning the diffuser.

LED WRAPAROUND CEILING LIGHT

DESCRIPTION

LED light enclosure

Wood mounting screw

Wire nut

1. Remove diffuser and wireway metal cover.

2. Locate ceiling joist and secure fixture to ceiling using wood screws.

Toggle bolts (not included) may be used through drywall to mount

fixture.

3. Knock blind knockout open in your required position. Connect supply

wires to wires on the fixture with wire nuts. Connect white to white,

black to black, green or bare copper wire to green wire. Put the

wireway metal cover in place to hide wires inside metal.

4. Complete the installation by installing LED light bulbs (sold separately)

NOTE: Ensure that the bypass LED T8 light has only one end to connect

input power. Make sure power end of LED light to connect with the

power end sockets of the fixture.