User manual

Page 5
Ambient Weather
6845 W. Frye Road
Chandler, AZ 85226
TEL [phone]  FAX [phone]
www.AmbientWeather.com
8 Sensor Settings
From the Menu Bar, select Sensors. Select the appropriate
sensors for your system and add any additional sensors not listed.
Entering a Name for your sensor is optional.
In general, weather stations have the following default sensor IDs:
Type
ID
Description
Indoor
thb0
t=temperature (indoor)
h=humidity (indoor)
b=barometer
0=no specific channel number
Most weather stations have the indoor
temperature, humidity and barometer built
into the console.
Outdoor
th0
t=temperature (outdoor)
h=humidity (outdoor)
0=no specific channel number
All of the weather stations include an
outdoor temperature and humidity sensor.
The default is no channel number.
UV
uv0
uv=ultra-violet radiation
0=no specific channel number
Most weather stations do not include a UV
sensor and is optional.
Solar
sol0
sol=solar radiation
0=no specific channel number
Most weather stations do not include a
Solar Radiation sensor and is optional.
rain
rain0
rain=rain gauge
0=no specific channel number
wind
wind0
wind= anemometer
0=no specific channel number
Note that you can define multiple channel numbers if your
weather station has more than one of each sensor (example,
channel 1,2,3 outdoor temperature, or th1, th2, and th3). In most
cases, these sensors are optional.
For some weather stations, this may take a while for all sensors
to report in.
Figure 6