User manual

Page 8
Ambient Weather
6845 W. Frye Road
Chandler, AZ 85226
TEL [phone]  FAX [phone]
www.AmbientWeather.com
Figure 9
11 Configuring as a WIFI Device
Reference Figure 9. To configure the WeatherHub3 as a WIFI
device, choose the WLAN Adaptor option, and select your WIFI
network (SSID) from the list of available networks.
Enter the Encryption Type and Pass Phrase. For more information
on your WIFI settings, consult your network administrator or WIFI
router settings.
Next, select Maintenance from the menu bar and select the
Reboot button. Once the WeatherHub3 has fully rebooted (the
blue LED on the front of the WeatherHub3 is ON), return to the
Network page and record the WLAN IP. You can now access the
device through the WLAN IP address.
We recommend you statically allocate this address by deselecting
the DHCP checkbox so it does not change.
NOTE: If you lose wireless connectivity, you can still connect via
the Ethernet cable and scan for the device again as described in
Section 4.