User manual

To charge the cell phone or music player device:

1. Set POWER/VOLUME control to OFF position. The radio will turn off automatically when

an external device is connected to the WR-089.

2. Plug the cell phone charging cable (with the appropriate adaptor, mini and micro USB tips

included) into the circular Phone Charge connector, as shown in Figure 7.

3. Plug other end of your cable into the cell phone’s charging connector.

4. If the phone does not begin charging, begin cranking. When charging a cell phone via the cell

phone charger, it is important to turn the crank at least two revolutions per second, or until

you see red charging LED turn on. This is an indication that the phone is receiving enough

power from the radio. Continue to crank at this rate until you are satisfied that an appropriate

level of charge has been received by your cell phone. If you decide to stop cranking for

whatever reason, please wait at least 5 seconds before cranking the radio again.

Figure 7

6. Specifications

Battery Power:

3xAAA/350 mAh/3.6V Ni-MH

Working voltage: 2.7V to 4.2V

Maximum Power Consumption: 0.5W

Radio Bands:

AM: 525 KHz to 1710KHz

FM: 88MHz to 108 MHz

WeatherBand: 162.4 to 162.5 MHz

Flashlight:

3-LED Flashlight

LED lifespan: 100,000 hours

LED illumination: 5000lux @120mm

Size and Dimensions:

Dimensions: 5" x 2.4" x 1.6"

Weight: less than 0.5 lbs.

Includes: