User manual

indicating the alarm function has been enabled).

Press the SET key to confirm the setting and continue pressing the SET key to toggle through each

alarm mode until it returns to the normal display mode.

Press the SNOOZE key or wait 10 seconds, and the alarm mode will return to the normal mode.

4.3.3 Cancelling the Alarm

When an alarm condition has been activated, the specific alarm will sound and flash for 120 seconds.

Press any key to cancel the alarm.

When an alarm condition is activated again within 10 minutes, the alarm will not sound but will

continue to flash until the weather condition is stable. This feature is useful to avoid repeated

triggering for the same alarm value.

The alarm will reset automatically once the value has fallen below the set value, or if a new value is

entered.

4.3.4 Outdoor Alarm – Temperature vs. Dew Point

When the outdoor weather alarm has been triggered, it will flash on the LCD display and the general

outdoor alarm icon and high/low alarm icon will flash. For example, in the outdoor temperature

display mode, when dew point high alarm is triggered the DEW POINT icon will flash along with

general outdoor alarm icon and high alarm icon, indicating that the current alarm source is from dew

point.

Figure 4

4.4 Min/Max Mode

While in Normal Mode, press the MIN/MAX key to enter the maximum mode, and the MAX icon

and maximum records will be displayed and begin flashing.

Press MIN/MAX key again to enter the minimum mode, and the MIN icon and minimum records will

be displayed and begin flashing.

Press MIN/MAX key again to return the Normal Mode.