User's Manual

Mode. The first setting will begin flashing. You can press the SET key again to skip any step, as

defined below.

Note: In the Set mode, press the [CH/+] key or [MINMAX/-] key to change or scroll the value.

Hold the [CH/+] key or [MINMAX/-] key for three seconds to increase/decrease rapidly.

Note: In Set mode, to enter the normal mode, complete all set mode operations or wait 30

seconds for timeout.

1. 12/24 Hour Format (default: 12h):. Press the [CH/+] key to change between 12 hour and 24

hour format.

2. Change Hour. Press the SET key again to set the hour. Press the [CH/+] key or [MINMAX/-]

key to adjust the hour up or down. Note the PM icon is present during afternoon hours.

3. Change Minute. Press the SET key again to set the minute. Press the [CH/+] key or

[MINMAX/-] key to adjust the minute up or down.

4. Date Format (default: MM-DD): Press the SET key again to enter the day/month format

mode. Press the [CH/+] key to switch between DD-MM-YY and MM-DD-YY.

5. Change Month. Press the SET key again to set the calendar month. Press the [CH/+] key or

[MINMAX/-] key to adjust the calendar month.

6. Change Day. Press the SET key again to set the calendar day. Press the [CH/+] key or

[MINMAX/-] key to adjust the calendar day.

7. Change Year. Press the SET key again to set the calendar year. Press the [CH/+] key or

[MINMAX/-] key to adjust the calendar year.

8. Time Alarm Hour. Press the SET key again to set time alarm hour. Press the [CH/+] key or

[MINMAX/-] key to adjust the hour up or down. While the alarm value is flashing, press and

hold the SET button for three seconds to turn the alarm on and off. The time alarm icon will

appear

when set, and disappear when disabled. Press (do not hold) the SET key to

advance to the next setting.

9. Time Alarm Minute. Press the SET key again to set time alarm minute. Press the [CH/+] key

or [MINMAX/-] key to adjust the minute up or down. While the alarm value is flashing, press

and hold the SET button for three seconds to turn the alarm on and off. The time alarm icon will

appear

when set, and disappear when disabled. Press (do not hold) the SET key to advance

to the next setting.

10. Temperature Units of Measure (default: °F):. Press the SET key again to change the

temperature units of measure (the UNITSET icon will be displayed). Press the [CH/+] key to

switch between °F and °C units of measure.

11. Max/Min Clearing. Press the SET key again to set the max/min clearing mode (CLR

ON/OFF). The Max/Min can be programmed to clear daily (at midnight) or manually. Press

the [CH/+] key to switch between “Clears Daily” and Clears Manually.

12. Backlight Color Setting (default: Outdoor or CH1). Press the SET key again to set the

backlight color defined parameter (the LED icon will be displayed). Press [CH/+] key or

[MINMAX/+] key to toggle between OUT (uses the channel 1 temperature to automatically