User's Manual

ManualsBrandsAmbient Weather ManualsElectronicsWireless Thermometer

Table Of Contents

Problem Solution

Indoor and Outdoor

Temperature do not

agree

Allow up to one hour for the sensors to stabilize due to

signal filtering. The indoor and outdoor temperature

sensors should agree within 2 °F (the sensor accuracy is

± 1 °F).

Use the calibration feature to match the indoor and

outdoor temperature to a known source.

Display console

contrast is weak

Replace console batteries with a fresh set of batteries.

8. Accessories

The following software and hardware accessories are available for this

weather station at .www.AmbientWeather.com

Accessory

Description

Add additional remote probe thermometers.

Supports up to eight remote sensors

Ambient Weather F007TP

Wireless Probe

thermometer for WS-09

Weather Stations

Add additional indoor/outdoor temperature

sensors. Supports up to eight remote sensors.

Ambient Weather F007T

Wireless Thermometer for

WS-09 Weather Stations

Add as many display consoles as you like to

your existing system to display the remote

sensor in different locations.

Ambient Weather WS-

09-C WS-09 Console

Only

Temperature

sensor reads too

high in the day time.

Make sure the probe thermometer is mounted in a

shaded area on the north facing wall. Consider the

following radiation shield if this is not possible:

http://www.ambientweather.com/amwesrpatean.html

AAA lithium batteries for cold weather climates.

Energizer AAAS Lithium

Battery (2-pack) -

Batteries for Long Life

and Cold Climates