User's Manual

Table Of Contents

1. Introduction

Thank you for your purchase of the Ambient Weather WS-09 8-Channel

Wireless Refrigerator/Freezer Thermometer. The following user guide provides

step by step instructions for installation, operation and troubleshooting. To

download the latest manual and additional troubleshooting tips, please visit:

The probe thermometer allows you to measure the temperature inside a

refrigerator or freezer, while mounting the display on the outside of the

refrigerator/freezer.

Wireless signals cannot pass through a metal barrier. If your refrigerator/freezer

is constructed of metal, the probe will have to be placed inside the

refrigerator/freezer and the display/transmitter outside the refrigerator/freezer.

In addition to the refrigerator/freezer application, the probe thermometer can be

placed in any medium where temperature is required, including ground

temperature, air temperature and water temperature.

2.Getting Started

Note: The power up sequence must be performed in the order shown in

this section (insert batteries in the remote transmitter(s) first, Display Console

second).

The WS-09 weather station consists of a display console (receiver), and two

probe thermometers for the refrigerator/freezer.

2.1 Parts List

2.2 Probe Thermometer Sensor Set Up

Note: Do not use rechargeable batteries. We recommend fresh alkaline

batteries for temperature ranges between -4 °F and 140 °F and fresh lithium

batteries for temperature ranges between -40 °F and 140 °F.

http://ambientweather.wikispaces.com/ws09

QTY Item

Display Console

Frame Dimensions (LxHxW): 4.50 x 5.0 x 1.00 in

LCD Dimensions (LxW): 3.75 x 3.50”

LCD Segment Height: 1.25 inches

Probe thermometer transmitter with probe (F007TP)

for refrigerator/freezer

Dimensions (LxHxW): 4.5” x 2.0” x 0.75”

Suction cup mounts