User's Manual

Table Of Contents

21. Channel 2 Temperature

22. Channel 2 Indicator

23. Low battery indicator

2.3.2 Sensor Operation Verification

Verify the temperature sensors match closely with the console and sensor array

in the same location (about 5 to 10' apart). The sensors should be within 2°F

(the accuracy is ± 1°F). Allow about 30 minutes for both sensors to stabilize.

The temperature can be adjusted or calibrated later to match each other or a

known source.

3. Remote Sensor Installation

The remote probe sensors have many applications, including measuring

inside/outside air temperature, water temperature, soil or ground temperature

and refrigerator / freezer temperatures.

3.1 Refrigerator/Freezer Mounting

Each sensor includes a detachable suction cup that may be used to

secure the remote sensor to the interior or exterior surface of the

refrigerator/freezer, as shown in Figure 6.

For better reception, we recommended installing the sensor to the outside

of the refrigerator/freezer. If the refrigerator/freezer is a metal box, the

wireless signal cannot escape, and the sensors must be placed on the

outside.

Figure 6