User's Manual

Table Of Contents

3.2 Wall Mounting

The remote sensor can be mounted to a wall or horizontal surface to measure

any temperature medium, including air, water and soil.

Use a screw or nail (not included) to affix the remote sensor to the wall, as

shown in Figure 8.

Note: If measuring outside air temperature, we recommend mounting the

sensor in the shade, on the north side of the house or structure to avoid radiant

heat transfer.

Figure 8

4. Console Operation

Note: The console has three buttons for easy operation: CLEAR/- button,

ALARM/ADJUST button, and CHANNEL/+ button.

4.1 Channel Selection

Press the CHANNEL/+ button to switch the display between the Channel 1

temperature, Channel 2 temperature, indoor temperature , remote sensors 3

through 8, and scroll mode .The channel indication arrow will point at the

selected channel. In scroll mode, the indoor temperature, and Channels 3-8 will

alternately be displayed in five second intervals.

4.2 Min and Max Alarm

You can set a min and max temperature alarm on the Channel 1 and Channel 2

thermometers. If the alarm is exceeded for more than 10 minutes, as audible

alert will occur and the alarm value will flash. To silence the alarm, press any

button.