iLive X2 – one of the latest wireless microphones systems of the AMC iLive series. This system is created for active musicians and presenters who also manage their own sound. iLive X2 improves your performance and simplifies your setup. iLive X2 - dual wireless microphone system which delivers the crystal clear sound quality that pro audio engineers trust.
Product Introduction The iLive X2 dual wireless microphone system is adopted by UHF frequency transmission. This system is controlled by mini CPU control which enhances the frequency more stable. The working range is 795MHz~820MHz where programmed 100 frequency combinations make the channels interchangeable. Advanced audio and noise lock by dual mute control technology avoids the interruption from any noise signal.
System components All system includes: Receiver .........................................................................................................................1pc. 1/4 jack audio connecting cable ...................................................................1pc. Power supply ..............................................................................................................1pc. Antennas ........................................................................................
Rear panel DC power socket Output A squelch level control Microphone A audio output Mixed audio output Microphone B audio output Output B squelch level control Receiver LCD Instruction 8-degree RF level display: to display the strength of the received RF signal. 8-degree Audio level display: to display audio signals. Frequency menu display: If FREQ lights, then the latter six characters display the current operating frequency.
Handheld transmitter Sound inlet basket LCD display IR port : receives infrared beam to synchronize frequencies Power on /off/mute switch Microphone body Battery port: 2*1,5 AA Alkaline batteries LOW and HIGH power’s RF switch LOCK switch Handheld transmitter LCD instruction LCD display showing the channel number Battery level indicator
Body Pack Transmitter Microphone Input Jack On-Off switch Low battery indicator: When the power is switched "ON", indicator blink one time, for improving that the battery capacity is normal. When indicator shows no activity unit does not have power, or the battery was not loaded properly. If the battery indicator lamp is shining, it shows that the battery is low and needs to be replaced.
Body Pack Transmitter’s LCD instruction LCD display showing the channel number Battery level indicator Lavalier microphone Microphone Microphone clip Mini XLR Microphone windscreen Before use please, fix Lavalier microphone to the lapel or tie where suitable place for sound pick-up is. Plug the mini XLR into the microphone input on body pack transmitter. Now you can start using this device.
Receiver setup 1. Before turning on the receiver, please turn off the transmitters and turn the receiver’s volume knobs down to the smallest volume. 2. If you want turn on/off the receiver, please push the POWER button for 3 seconds. 3. After transmitters turning on, the corresponding RF level will be illuminated on the LCD. Now you can adjust receiver's volume to a proper level and make some sounds towards microphone. During this, receiver’s audio level meter should illuminate signal of your voice.
8. For the System Locking Control press the SET button for several times until you will see the LCD screen as in picture 3. After 2 -3 seconds the pictures, "LOC ON“ or "LOC OFF " will appear on the position of "LOCK“. LOCK status can be changed by pressing " ^ " or " v " buttons. After changes please push SET button one more time to confirm the settings. (Note: This Control function is for locking receiver’s current working status.
Body Pack Transmitter setup 1. Before starting, please open the battery cover and insert 2AA alkaline batteries. 2. Slide the transmitter ON/OFF switch to the ON position. LCD displays the CHANNEL and BATTERY LEVEL. 3. If you want to change the active channel, you need to change the channel into the receiver and set receivers menu status as in picture1. After this, target transmitter’s IR port in to receiver’s infrared automatic frequency window, after couple seconds channel will be changed. 4.
Operation 1. Please choose non-intermodulation frequency setting. Usually 4 transmitters can be used at the same time within 25MHz bandwidth. If more sets of wireless microphones are needed, devices with other frequency band should be applied. 2. There should be appropriate distance between the receiver and transmitter. Transmitter should be not too far and too near to the receivers. 3.
Troubleshooting Problem Solution No indication on receiver Make sure AC adapter is securely plugged into electrical outlet and in to DC input connector on rear panel of receiver Audio signal distortion, extra noise solutions No RF signal Remove the RF interference sources near by receiver and transmitter (such as CD players, computers, Digital devices, earphones monitoring system) Receivers and transmitters should be set at the same frequency. Change receivers squelch level.
Handheld transmitter 1. Open the battery cover 2. Insert the 2*AA Alkaline battery 3.
Body Pack Transmitter 1. Open the battery cover Battery cover 2. Insert the 2*1,5V AA Alkaline battery 3.
Receiver’s specifications: Carrier frequency range: 795 MHz - 820 MHz Modulation: FM Adjustable range: 25 MHz Channels: 100 Channel spacing: 250 kHz Frequency stability: ±0.005% Dynamic range: 100 dB Max. Deviation: ±45 kHz Frequency response: 80 Hz-15 kHz (±3 dB) S/N ratio: >105 dB T.H.D: ≤0.