Specifications

Troubleshooting
Problem
Solution
No indication on receiver
Make sure AC adapter is securely plugged
into electrical outlet and in to DC input
connector on rear panel of receiver
Audio signal distortion, extra noise
solutions
Remove the RF interference sources near
by receiver and transmitter (such as CD
players, computers, Digital devices,
earphones monitoring system) Receivers
and transmitters should be set at the same
frequency. Change receivers squelch level.
Make the distance smaller between
receiver and transmitter.
No RF signal
Transmission frequency should be the
same as the receiving frequency, or make
sure the transmitter is not out of range.
RF signal available but no audio signal
Check microphone status. Maybe
microphone power switch is on the mute
position.
Unable to turn on transmitter Replace transmitter batteries