Operation Manual

11
TECHNICAL DATA
STORAGE
Reminder:
Waste electrical products must not be disposed of with household waste.
This product should be taken to your local recycling centre for safe treatment.
Mode
l PLM9KE-410 PLM12KE-410 PLM15KE-410
PLM9
KEH-410 PLM12KEH-410 PLM15KEH-410
Cooling capacity *
BTU/h 7500 9400 11300
kW 2.2 2.75 3.3
Power consumption -Cooling
-Heating (EH only)
0.8 1.0
1.5
kW 1.75
1.68
R410A / 5
00 R410A / 630
-Heating element (EH only)
Mains V / Hz / PH 220 - 240 / 50 / 1
Compressor model rotary
Fan speeds 3 (2+1 turbo)
Thermostatic range °C 18 - 32
Refrigerant
charge type / g R410A / 420
Dimensions
(w x h x d) mm 500 x 840 x 415
Net weight kg 33.1 34.3 39.3
* measu
PLM9KEHx-410 and PLM9KEx-410 series can be connected only to a supply with system impedance no more
than 0.383 Ohm.
PLM12KEHx-410 and PLM12KEx-410 series can be connected only to a supply with system impedance no
more than 0.247 Ohm.
PLM15KEHx-410 and PLM15KEx-410 series can be connected only to a supply with system impedance no
more than 0.110 Ohm
If necessary, please consult your supply authority for system impedance information.
red conform EN 14511
Subje
ct to modifi cations without prior notice. For greater precision, please refer to the rating label placed on
the
product.
Empty the internal water container.
Clean
the screen filter.
Rem
ove 3M Filtrete™ filter and active carbon filter.
• Remove the 3M Filtrete™ filter and active carbon filter before end of season storage and
install
new filters at the beginning of the new season.
The old filters can be disposed of in the ‘Non-biological rubbish
container’.
• Replacement filter packages are available from Amcor.
Put the unit in Fan Only mode for a few hours to ensure that the inside
be
comes completely dry.
Store the cable as shown.
Protect the unit against dust and store in a dry place, not accessible to children.