HIGH WALL SPLIT AIR CONDITIONER User manual AHW 164

7
Dehumidify
1. Press the
MODE button until the dehumidify symbol
appears.
2. Set the desired temperature with the up and/or
down -button.
3. The
FAN SPEED button does not work in dehumidify mode.
The fan speed will always be low in this mode.
Fan mode
1. Press the MODE button until the fan symbol appears.
2. Set the desired temperature with the up and/or
down -button.
3. Use the FAN SPEED button to set the fan speed.
Sleep mode
1. Press the SLEEP button to reduce the noise level of the air
flow from the inside unit. Cancel the sleep mode by pressing
this button again.
2. Fan speed is set to low, pressing the FAN SPEED button will
deactivate the sleep mode.
3. When sleep mode is activated, the symbol will be visible in the display.
Timer on function
1. Press the AUTOSTART button to set the ON-timer, will be
displayed.
2. Press the HOUR button to set hours.
3. Press the MIN button to set the minutes in intervals of
10 minutes.
Once the set time has elapsed, the appliance will switch itself on.
Press the AUTOSTART button again to cancel the timer on function.
Timer off function
1. Press the AUTOSTOP button to set the OFF-timer during
operation, will be displayed.
2. Press the HOUR button to set hours.
3. Press the MIN button to set the minutes in intervals of
10 minutes.
Once the set time has elapsed, the appliance will switch itself off.
Press the AUTOSTOP button again to cancel the timer off function.
Timer on and timer off can be used in combination . The function for which
the set time is reached first will be performed.
Note: the timer function can only be activated if the current time has been set.