Instruction manual

4
1. Power ON/OFF indicator light
2. Water tank full indicator – when lit, tank may be full or incorrectly positioned
3. Humidistat selector knob
Function: Controls room relative humidity between 40 % - 80 %.
( When the relative humidity in a room is lower than the selected humidity, the compressor
will stop running.)
4. Power ON/OFF switch & Fan speed selector switch OFF/LO/HI/HEAT
Functions: Sets operating condition of unit as below.
OFF Unit is off. There is no moisture removal activity.
LO Unit works only as dehumidifier at low fan speed (quieter operation).
HI Unit works only as dehumidifier at high fan speed (quicker moisture removal).
HEATER Unit works with the 800W HEATER ONLY when the humidistat 3 is turned
fully clockwise.
For the DEHUMIDIFIER and 800W HEATER to WORK TOGETHER
when dehumidification is required, choose the heat mode with knob 4 and
turn the humidistat 3 to the preferred humidity setting.
When the heater is running by default the fan will always run at high speed.
PLEASE NOTE
When the unit is running in Lo, Hi or Heat mode the fan will always run – even if the
compressor switches off as the unit achieves the desired humidity level.
To switch off the fan turn knob 4 to the OFF position
SAFETY WARNING:
Do not dry clothes on the unit or too close to it when the heater is in operation.
O
FF
HI
HE
AT
POWE
R
4
3
2
1
W
AT
ER
FU
LL
LO
CONTROLS
Parts identification