Instruction manual
GB
10
MAINTENANCE
Always unplug the unit from the mains before carrying out any maintenance or clean-
ing the unit.
Cleaning the body
Use only a soft cloth to wipe the unit clean.
Do not use volatile chemicals, petrol, detergents, chemically treated cloths or other
harmful cleansing solutions. These could all possibly damage the cabinet.
Cleaning the washable air lter
This dehumidier is equipped with a washable lter. This will capture most airborne
pollutants like dust, smoke, animal dander, mould spores and pollen to create a less
irritating living environment.
It is advisable to check the lter on a regular basis (at least monthly and after stor-
age) and clean as necessary:
• Extract the lter holder
• Use a vacuum cleaner or tap the lter lightly.
If the lter is particularly dirty, use luke-warm water with a small amount of medium
strength detergent and rinse thoroughly under the cold water tap.
Make sure the lter is completely dry before replacing.
Do not expose the lter to sunlight or other sources of direct heat as this may cause
the lter and frame to warp.
Cleaning and replacing the carbon lter.
The carbon lter can be cleaned with a vacuum cleaner, never rinse it with water. We
suggest to replace the carbon lter every 6 months.
Optional lters
3M™ High Air Flow lter
PCO – Photo Catalytic Oxidation (optional)
TiO2 lter is included in the multi air lter.
STORAGE
If the dehumidier is not used for long periods of time, follow these steps:
• disconnect the unit and wrap the power cable.
• if used, empty the water container, remove the scent emitter .
• clean the unit and lter, pack it in its original packaging or cover to protect against
dust.
• store the unit in an upright position in a cool, dry place away from access by chil-
dren.