Instruction manual

GB
12
CONTINUOUS DRAINAGE (OPTIONAL)
For the continuous drainage please refer to the
following instructions and pictures :
1. Cut out the hole for the drainage tube on the
back of the unit. There are 4 tiny strips holding
the cover in the hole, just cut them and the
cover will come out.
2. Push the drain tube through the hole in the
back of the unit and x it on to the plastic
drain tube.
3. The water tank have to remain in place also in
the continuous drainage.
4. Make sure that the drain tube will have a
continuous downward slop all the way to the
drain point.
5. Do not insert the edge of the drain tube below
the water level.
SPOT DEHUMIDIFICATION
Normal dehumidication
Before you start the unit, open the air outlet
grill located behind the control panel to direct
the dehumidied dry air run up according to
your wish.
Spot dehumidication
Your dehumidier has got a unique feature. Be-
sides dehumidifying the air in the room it can
at the same time dehumidify humid spots like
closets, shoes, dresses etc. by a exible hose
connected to the rear panel:
• take off the cover of the scent emitter
• take out the scent capsule
• screw the exible hose into its adapter
• connect the adapter to the opening in the
rear panel
• close the air outlet panel on the top of the
unit
• run the unit.