User Manual

Page 6 of 15
INSTALLATION
Warning: Before using this unit, please keep it upright for at least 3-4 hours.
This unit can easily be moved from one room to another.
While moving the unit please note that it must always be kept upright and then placed on an
even surface.
1. Attach the fishtail
connector to the end of
the hose, by extending
the end of the hose and
twisting the fishtail until
firmly attached (At least 3
full rotations)
2. Attach the exhaust hose to the air conditioner body, by
pushing into position on the hot air outlet vent.
3. Make sure the unit is upright and there are no
obstructions to the air inlets and outlet grills.
INSTALLATION OF WINDOW KIT.
The window kit (slide bar and fishtail) can be
used with sliding windows and doors. For
other types of window, the fishtail should be
used on its own.
1. Partially open the window and then fix
the window kit to the window.
2. Fix the end of the fishtail
to the air-outlet window
kit.