- Am79C930 PCnetTM-Mobile Single-Chip Wireless LAN Media Access Controller

P R E L I M I N A R Y
AMD
139Am79C930
AC CHARACTERISTICS
3.3 V MEMORY BUS INTERFACE
ABSOLUTE MAXIMUM RATINGS
Storage Temperature: –65 to +150°C. . . . . . . . . . . .
Ambient Temperature Under Bias: –65 to +125°C. . .
Supply Voltage to AVSS
or DVSS (AVDD, DVDD): –0.3 to +6 V. . . . . . . . . . . . . .
Stresses above those listed under Absolute Maximum
Ratings may cause permanent device failure. Functionality at
or above these limits is not implied. Exposure to Absolute
Maximum Ratings for extended periods may affect
device reliability.
OPERATING RANGES
Commercial (C) Devices
Temperature (T
A)0°C to + 70°C. . . . . . . . . . . . . . . . .
Supply Voltages (V
CC,VDDT, VDDU1, VDDU2, VDDM, VDDP)
3.0 V to 5.25 V. . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Supply Voltages
(AV
DD, VDD5) +5 V ± 5%. . . . . . . . . . . . . . . . . . . . . . . .
All inputs within the range: V
SS – 0.5 V ≤ VIN ≤ VDD + 0.1 X
V
DD – where VSS and VDD are appropriate reference pins
for a given input pin. (See section on power supply
pin descriptions.)
CL = 50 pF unless otherwise noted
Operating ranges define those limits between which the func-
tionality of the device is guaranteed.
MEMORY BUS READ ACCESS
Parameter
Symbol Parameter Description Test Conditions Min Max Unit
tmAD MA[16:0] valid from CLKIN ↓ 2 100 ns
tmCD CE active delay from CLKIN ↓ Note 1 2 100 ns
tmOD MOE active delay from CLKIN ↓ 2 100 ns
tmOLZ MOE ↓ to MD[7:0] driven 0 wait states 0 70 ns
(Note 3) 1 wait state 170 ns
2 wait states 270 ns
tmAA Address Read Access Time 0 wait states 120 ns
(Note 3) 1 wait state 220 ns
2 wait states 320 ns
tmACS CE Read Access Time 0 wait states 120 ns
(Notes 1, 3) 1 wait state 220 ns
2 wait states 320 ns
tmOE MOE Read Access Time 0 wait states 70 ns
(Note 3) 1 wait state 170 ns
2 wait states 270 ns
tmRI CE Inactive Time Notes 1, 2 0 ns
tmAH MA[16:0] valid hold from MOE ↑ Note 1 TCLKIN-10 ns
tmCH CE valid hold from MOE ↑ TCLKIN-10 ns
tmH MD[7:0] valid hold from MOE ↑ Note 2 0 ns
tmHZ MD[7:0] inactive from MOE ↑ Note 2 0 2 X TCLKIN-15 ns
Notes:
1.
CE = one of: FCE , SCE , XCE
2. Parameter not included in the production test.
3. Value is dependent upon TCLKIN value. Value given is for CLKIN = 20 MHz.