Instructions / Assembly

Transparency to
create outlines
Interior
Step 7
Installation Flange
Apply sealant to door
frame.
Apply 1/4" bead of sealant
along the edge of the
installation ange on the
head and side jambs along
the interior side where it
will contact the opening.
It is strongly recommended that you use a membrane or vinyl-based
sill pan for a weathertight seal. Follow the sill pan manufacturer’s
installation instructions.
Exterior
Step 6
Installation Flange
2"
Exterior
2"
Break for
water drainage
Apply sealant to opening.
Apply two (2) 1/4" beads of
exterior window/door grade
sealant to sill and 2" up each
side of rough opening. The
exterior sealant bead should
be at the exterior edge of the
opening. The beads of sealant
should be 2" apart.
NOTE: Leave two (2) small
breaks in exterior sealant bead
only to allow for water drainage.
Installation Guide
Assembled 2-Panel Patio Door
13
888-504-0005www.AmericanCraftsmanWindows.com