Instructions / Assembly

Transparency to
create outlines
Step 19
No Installation Flange
Fasten frame.
(Use blue hardware bag)
Attach frame to opening using
sixteen (16) #10 x 2" pan
head screws in all pre-drilled
holes in head and side jambs.
Unlock and open the operating
door panel as needed to
access all pre-drilled holes.
Interior
#10 x 2" pan
head screws
If installing High-Velocity Hurricane Zone (HVHZ) approved patio door, proceed
to Step 28. Otherwise, proceed to Step 20 - No Installation Flange.
Shim
Step 18
No Installation Flange
Interior
Shim door frame.
Shim so door frame is
plumb, level and square.
Shim at all pre-punched
holes inside frame. Trim
shims as needed. Shims
must be recessed 3/8”.
Recessed
3/8"
Shim
Side Jamb
Installation Guide
Assembled 2-Panel Patio Door
22
888-504-0005 www.AmericanCraftsmanWindows.com