Instructions / Assembly

Transparency to
create outlines
1
2
Keeper
1/16"
Removable
Tape
Push insect screen panel handle
all the way up. Mark 1/16"
below bottom of insect screen
latch with removable tape and
transfer the mark to the door
frame with removable tape.
Position top of insect screen
keeper with mark on door frame.
Insect screen keeper should
be installed with the ange up.
Attach insect screen keeper
using included screw.
Adjust insect screen keeper as
necessary for easy latching and
releasing. Remove Tape.
1
2
3
Step 27
Install insect screen keeper
into side jamb track.
Exterior
If using optional blinds between the glass, proceed to Appendix A, Step A1.
For Non High-Velocity Hurricane Zone (HVHZ) approved patio door,
installation is complete
Installation Guide
Assembled 2-Panel Patio Door
30
888-504-0005 www.AmericanCraftsmanWindows.com