Instructions / Assembly

Transparency to
create outlines
Install one (1) #8 x 2" stainless steel
screw through hole on interior side
of metal clip and one (1) #8 x 5/8"
stainless steel screw through hole on
exterior side of metal clip.
Install two (2) #10 x 1" stainless
steel truss head screws through side
holes of metal clip.
1
2
Step 30
Install additional screws in
metal clip and stationary panel
locator.
1
2
Metal Clip
Exterior
#8 x 5/8" Screw
(exterior side of clip)
#8 x 2"
Screw
(interior
side of clip)
#10 x 1"
Screws
If using installation ange,
proceed to Step 11 -
Installation Flange. If no
installation ange will be
used, proceed to Step 20 -
No Installation Flange.
Fastening
completed
Installation Guide
Assembled 2-Panel Patio Door
33
888-504-0005www.AmericanCraftsmanWindows.com