Instructions / Assembly

Transparency to
create outlines
Step 2
Correct size
Framer’s
square
Plumb
Tape
measure
Level
Prepare rough opening.
Inspect opening for correct
size. Opening should be
1/2" larger than door size in
width and height.
Check sill plate for level.
Sill must be level. If sill is
not level, correct before
continuing.
Check rough opening for
plumb and level. If rough
opening is not plumb or
level, correct as necessary.
Check opening for square
by measuring diagonally,
upper left to lower right and
upper right to lower left
corner. Measurements must
be within 1/8". If rough
opening is not square,
correct as necessary.
If using installation ange, continue with Step 3 Installation Flange.
If installation ange will not be used, proceed to Step 15 No Installa-
tion Flange.
Installation Guide
Assembled 2-Panel Patio Door
9
888-504-0005www.AmericanCraftsmanWindows.com