Specifications

Before Installing the Intellex
4 Intellex®
Programmable Settings
Video Format
Video Level
Alarm
Setting Default Value
Camera names Camera1–Camera16
Camera termination 75 Ω
Security access Disabled
Administrator PIN 1234
Schedule mode Regular
Record settings Circular Mode, normal sensitivity, 60 ips (50 ips PAL)
Alarm duration 5 seconds
Alarm record settings 30 ips (25 ips PAL), normal quality, normal sensitivity
Alarm on video loss Enabled
Alarm display message Enabled
Latch message Disabled
Alarm input names AlarmIn1–AlarmIn16
Alarm input polarity Active Low
Live sequencer dwell 2 seconds
Live display format 1×1
Playback overlay Enabled, Upper-Right
Color (input and output) NTSC or PAL
B&W (input and output) EIA or CCIR
Camera inputs 1.0 V p-p, 75 Ω
Camera outputs 1.0 V p-p, 75 Ω
Analog output 1.0 V p-p, 75 Ω
Alarm inputs 4, 8, or 16 inputs. Activated by contact closure or TTL/CMOS signal.
Programmable polarity.
Alarm outputs 4, 8, or 16 outputs. TTL/CMOS compatible active high. Driven to +4V and
can drive 6mA. Initialized to inactive low on power-up.
Alarm duration Programmable from 5 seconds – 5 minutes.